iPhone 12-14 Pro Max Yootech Wireless Charger Base
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of the cradle designed for the Yootech 10w fast wireless charging plate available from Amazon.
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 51
- Wydruki
- 1
- Wyświetlenia
- 732
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix wireless charger holder for all iPhone Pro Max variants to work with the 10w Yootech wireless charger. Have tested the fitment of the iPhone 12-14 Pro Max and no issues and all successfully activate wireless charging.
The walls were redesigned much thicker to resist heat deformation. The included block is for resting the charger against in the 14th gen F150 to keep it at the angle shown in the printed picture and is not required if not needed. The fit for the charger in the cradle is very snug and will not fall out on its own.
Printing the charger cradle, use PETG (if a white car/truck) or ABS (for all dark colored vehicles) for best heat resistance. Print at a .2-.28 layer with minimum 4 walls, 5 bottom layers, and 20-30% infill.
The model shown printed with standard PETG has survived 60+ 100F/38C days with no deformation or warping.