Guitar Hero PS3 Les Paul RJ11 USB replacement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A replacement for the unused RJ11 Plug on a Guitar Hero Les Paul controller that allows for a USB cable to passthrough.
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 201
- Wydruki
- 1
- Wyświetlenia
- 1571
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This model fits the PS3 (and maybe Xbox 360) Guitar Hero Les Paul controller. It replaces the unused RJ11 port on the guitar with a passthrough for a USB cable for Arduino-modded controllers for use with a more modern system and the PC-based 'Clone Hero" games.
20% infill should work and a 0.2mm layer height is good enough. The fit of the cable in it is VERY tight as well to ensure that you don't accidentally pull the USB cable out of your Arduino and out of the controller. You may want to file or sand the passthrough if it is too tight for your given cable (The hole for the USB cable measures 3.45mm)
(Original Inspiration to create this mod: https://www.thingiverse.com/thing:5799797)