Sovol SV06 TH3D EZABL 18mm Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a mount for the 18mm TH3D EZABL sensor with the side adjustment screw.
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 38
- Wydruki
- 1
- Wyświetlenia
- 524
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a mount for the 18mm TH3D EZABL sensor with the side adjustment screw.. The mount that TH3D provides in their STL pack does not work well with the EZABL sensor that has the adjustment screw on the side. The ring ends up covering the screw when you mount the sensor. This mount moves the ring down and leaves access to the adjustment screw.
It mounts using the same screws that the original mount uses. It should print fine without supports. Print it on its back with the screw holes on the build plate to avoid stress along the layer lines.
Probe offset: (31, -26, 0)