1 / 2
Hamilton Beach 40DM Parts
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Parts for the Hamilton Beach 40DM, including: Feet, Screw Spacer, and Control Knobs
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 201
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Share Alike
These are some replacement parts for the Hamilton Beach 40DM Malt/Milkshake Mixer
- Screw Spacer: The 2 screws that hold the top/motor cover originally had what looked like 2 O-Rings or lock washers, either way they crumbled as soon as I loosened the screws on mine so here are some replacements. i printed these in TPU to possibly help with vibrations, but regular filament should work too
- Feet: These are about twice the thickness as the originals so it should space the mixer up another few mm from the countertop and possibly help more with vibrations. I printed these in TPU but regular filament should work fine
- Control Knob: I printed this standing normally as it would on the mixer, with some supports. Could probably be printed upside down without supports but use your own judgement on this