Cyclodial Planetary Gear Mechanism
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small Demonstrator of how you can use planetary gears for cyclodial application
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 27
- Wydruki
- 1
- Wyświetlenia
- 577
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution
Yesterday morning I woke up and thought it would be cool to play around with planetary gears.
Since this is the beauty of this hobby, this is what I did.
This mechanism turns the two outer shells slowly relative to each other due to the different number of teeth on the inside.
A demonstration video of the prototype in operation can be watched here:
This mechanism is quite clunky and doesn't work too smooth, however it still is enough to demonstrate how planetary gears can be used for cyclodial action.
The file “Planetary Gear.stl” needs to be printed three times, everything else needs to be printed only once.
You need one Screw 3.5x16
FreeCAD files included as always!