Ender 5 S1 Part Cooling Fan Duct
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Direct replacement for the orginal part cooling fan duct to replace damaged items. Print a spare before it's needed!
- Ocena
- 5 / 5
- Polubienia
- 120
- Pobrania
- 840
- Wydruki
- 2
- Wyświetlenia
- 5600
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
After seeing several people ending up with broken part cooling fan ducts due to failed prints I realized its safer to have a design available so that I can have a spare ready to go if needed.
I have progressed through many variants and have ended up with a model very similar to the orginal. Testing performance on overhang prints shows very similar results as the original.
- Higher temp suitable materials would be best used.
- Print on end and use supports. Organic/Tree supports work well.
- Reinstall using the same original screws.
- Make sure you re-adjust your Z offset after install as your print may be slightly off from the orginal and it impacts the z offset of the crtouch.
Be sure to check out my Ender 5 S1 hotend cover if you want to cut a bit of weight from your moving components. https://www.printables.com/model/392343-ender-5-s1-hotend-cover