1 / 6
Round Metric Screw Measuring Tool (M2-M6, up to 48mm)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A round shaped metric screw measuring tool, just 6mm height and 50mm diameter. Prints fast using less than 10g
- Ocena
- 5 / 5
- Polubienia
- 24
- Pobrania
- 193
- Wydruki
- 5
- Wyświetlenia
- 884
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 5) (Komentarze: 6)Remiksy (0)Kolekcje (42)Powiązane
A round shaped screw measuring tool in a diameter of 50mm with 6mm height to fit in a pocket with a capability to identify M2, M2.5, M3, M4, M5, M6 screws and measure screw lengths up to 48mm.
I have used PLA, 0.2mm layer height, 10% cubic infill, 5 solid layers top/bottom and 3 perimeters. It uses about 9g of plastic
For me disabling arachne and thin walls gives the best quality for the printed numbers. I use 0.45mm print widths
