1 / 3
Snap-Off Knife 18mm — zdjęcie 1
1 / 3

Snap-Off Knife 18mm

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Useful and simple snap off knife for 18mm spare blade.

Ocena
4,583 / 5
Polubienia
181
Pobrania
583
Wydruki
13
Wyświetlenia
3005
Oceny
12

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial

Printing

Only the Bottom and Top parts need supports to be successfully printed, other parts are printable without supports. 

Assembly

The Front and Bottom parts must be glued together like the Top and Rear parts.

Be careful while assembling the 18mm blade into the body.

Step 1

Insert the Carriage through the Top part with glued Rear part and from the bottom side insert the blade a secure it in place with a pin on the carriage.

Be careful during assembling the 18mm blade with a carriage into the body.

Step 2

Roll the Wheel part onto the Bottom part. Only a few revolutions.

Step 3

Move the blate a little bit forward and insert it through the slit in the Front part.

Step 4

Align the hole in the Top part with the Wheel at the Bottom part.

Step 5

Secure the blade by tightening the wheel.

Tagi