Light Box Adapter for RODSGEAR Film Scanner
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter to combine the RODSGEAR Film Scanner onto a Raleno Lightbox
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 60
- Wydruki
- 0
- Wyświetlenia
- 591
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This mounting plate merges the light box holder originally created by Tchitchi with the modular film scanner system created by RODSGEAR.
The plate slots into the light box holder and 6x1.5mm magnets can be glued in to connect the film scanner system.
Since this was designed for RODSGEAR's original body and manual gear box components. It does not support the the wider 120/medium format film holders or the motor driven components. This design will accept the 35mm full frame, half frame and pano masks.
Print dimensions
189 x 115 x 1.4 mm (fits on an Ender 3)
Print settings
Layer height: 0.3 mm
Infill: 100%
Be sure to have good bed levelling for best results to prevent holes/failures/warping.