Universal Laser Systems Rotary Angler
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Please be aware that if you put this on your machine, there is a possibility that the laser print head will hit the…
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 691
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
Please be aware that if you put this on your machine, there is a possibility that the laser print head will hit the rotary. Before trying your design, please make sure this will not happen at your set angle.
The rotary tool on my local makerspace's laser cutter/engraver lacked the ability to compensate for a glass's or tumblers angle. So I made something to fix that.
I used this knob for my build: https://www.thingiverse.com/thing:3052926
It screws into an m4 brass insert that's been inset into the non-countersunk hole on the small part. That piece attaches to the rotary an m4 buttonhead screw into the screw hole that was already there.