1 / 1
AnyCubic Kobra Neo Filament Catcher
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Catches filament from the nozzle
- Ocena
- 4,875 / 5
- Polubienia
- 125
- Pobrania
- 1232
- Wydruki
- 11
- Wyświetlenia
- 3192
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 11) (Komentarze: 17)Remiksy (0)Kolekcje (191)Powiązane
This piece fits in the tracks under where the nozzle defaults to. This will catch bits that fall off the nozzle and keep them from going under the printer.
2 Models, one is wider that goes more under the bed so nothing is missed.
Supports - Yes (I used Tree supports with the bottom on the bed)
Infill - 10-20%
Layer Height - 0.2 (Can do 0.3 but the rounded edges don't look great)
