Square Milwaukee Packout Slim Bin with Cutout
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A bin for customizable layouts of bit holders with the bottom cutout to save print time and filament.
- Ocena
- 0 / 5
- Polubienia
- 61
- Pobrania
- 222
- Wydruki
- 1
- Wyświetlenia
- 2081
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
I know there are other paid versions similar to my model out there but honestly this took me 3 minutes to make in Microsoft's 3D builder (which comes with Windows 11.)
This is a bin for the SLIM Milwaukee Packout Organizers with a hole cut from the bottom to save filament and time producing these.
To design I simply took an original model from Ben Johnson (https://www.thingiverse.com/benjamenjohnson/designs), inverted the container, and deleted the base. Nothing fancy but I also know almost nothing about CAD. I left enough of a lip around the base of the container as not to start the print on an upward slope right away as well as give the print some adhesion to the bed.
I have built a profile for my custom packout gear in Prusa Slicer that is 20% gyroid infill, 3 perimeters, and temp set to my specific filament. This container is actually printed in Prusa's Matte Black PETG.
This design isn't world changing by any means but when you're printing tons of these it will add up. Based on Ben's design with the same parameters this reduces filament usage by 17% and exactly 30 minutes of print time.