Gridfinity Vinca Caliper and ruler holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
2x2 Gridfinity module for storing of Vinca calipers (or similar), 2 rulers, and spare LR44 batteries. Magnetic bottom.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 89
- Wydruki
- 1
- Wyświetlenia
- 488
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
For those of us without fancy Japanese calipers, here is a 2x2 Gridfinity module for storing of Vinca calipers (or similar), 2 rulers, and spare LR44 batteries. The ruler slots are 30mm x 2mm.
Friction-fit holes accommodating 6x2 mm magnets in the base without gluing.
Prints without supports. Use 10-15% infill. It will consume a fair bit of filament due to the “flat top” design. An alternative would be to extrude the tool holders from the base and skip the “walls” of the holder.
To generate the bin base, I used the excellent FusionGridfinityGeneator by Le0Michine.