3D Printable Fountain Pen Cap Liner Replacement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cap liner replacement for the Jinhao x450 fountain pen.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 381
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Public Domain
My Jinhao x450 fountain pen cap recently had the liner crack.
I tried to repair it with glue but it broke. Instead of buying a new pen I found I was able to design a new cap liner from the broken one and fit it into the pen. It works very well and keeps the pen from drying out, while It doesn't have the same “click” when putting the cap on it mounts securely and keeps the pen functioning.
I printed mine in PLA+ 0.30 layer height and 0.6mm nozzle.
INSTALL INSTRUCTIONS:
When installing the liner make sure to screw the top nipple into the inner threads on the gold colored holder(shown at 2:20 in the video below). It is made to be larger so it can be threaded onto the holder. It may take a bit of force, but I found holding the printed piece and using pliers on the cap liner holder worked. To install it into the cap itself, you will need to use a pen to push from the bottom, or pliers to pull it from the top. Its a very snug fit.
Teardown Instructions from this wonderful youtuber: