Stackable spinning stand for spool drawers/trays
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is another spool drawers support easy in design. You can stack spools just adding one support over the other.
- Ocena
- 4 / 5
- Polubienia
- 109
- Pobrania
- 284
- Wydruki
- 1
- Wyświetlenia
- 2724
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
This is another spool drawers support easy in design. You can stack spools just adding one support over the other.
I made an ending piece too.
The STLs provided are for Mastoner/Albita empty spools (54mm of diameter horle) and 63mm height when flat.
I used this excellent trays:
https://www.thingiverse.com/thing:3365824
Print instructions
This is another spool drawers support easy in design. You can stack spools just adding one support over the other.
I made an ending piece too.
The STLs provided are for Mastoner/Albita empty spools (54mm of diameter horle) and 63mm height when flat.
I used this excellent trays:
https://www.thingiverse.com/thing:3365824