Snapmaker 2.0 A350 CNC Clamps
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Snapmaker 2.0 A350 CNC Clamps • Designed originally in Fusion360 (attached) • .jsons for print & filament settings…
- Ocena
- 0 / 5
- Polubienia
- 34
- Pobrania
- 162
- Wydruki
- 0
- Wyświetlenia
- 1179
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
Snapmaker 2.0 A350 CNC Clamps
• Designed originally in Fusion360 (attached) • .jsons for print & filament settings (attached) • Contains three (3) styles of clamp
4-Screw straight
6-Screw 90 Degree elbow
8-Screw T
Built with a 0.3mm offset. Depending on how fine-tuned your printer is, should be able to change offset in F360 file to smaller amount.
Uses:
M4x30mm Socket Cap (attaches clamp to CNC waste board)
M4x20-65mm Socket Cap (screw clamp to hold materials to waste board)
M4 nuts
Amazon Parts:
- DYWISHKEY 100 Pieces M4 x 40mm/45mm/50mm/55mm/65mm Stainless Steel 304 Hex Socket Head Cap Bolts and Nuts Ki - https://www.amazon.com/gp/product/B07X4VS5RV/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Print Settings
Printer:
Snapmaker 2.0 A350
Rafts:
No
Supports:
No
Infill:
30
Filament: Overture PLA+ Light Grey
Notes:
Filament - https://www.amazon.com/gp/product/B07VDN9TNH/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Minimal Sanding & deburring
Sanding pads:
* Sanding Block Polisher Buffing File 60/100 Grit: * White Buffing Block, 180/240 Grit: * Jumbo Double-sided File Emery Boards 240/240 Grit: * Double-sided File Emery Boards 100/180 Grit:How I Designed This
Category: DIY