Cyclone for PET Bottle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Printed a Cyclone for a hard PET bottle (in this case its Sprite) to glue in. It has an efficiency of 99.87% for 25µm…
- Ocena
- 0 / 5
- Polubienia
- 30
- Pobrania
- 142
- Wydruki
- 0
- Wyświetlenia
- 1650
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Engineering
- Licencja
- Creative Commons — Attribution
Printed a Cyclone for a hard PET bottle (in this case its Sprite) to glue in.
It has an efficiency of 99.87% for 25µm corundum which is a lot more than i would have guessed!
Just glue the bottle in and adapt it to a bigger (and stiff) container. I use it for my sandblaster.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0,3
Infill:
20
Filament:
Rheneon PLA
Notes:
Printed with 0.6mm nozzle and 0.3mm layerthickness, support is necessary.
Category: Engineering