1 / 3
[40mm] Dragon Hotend Fan Mount for Hydra V6 — zdjęcie 1
1 / 3

[40mm] Dragon Hotend Fan Mount for Hydra V6

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

40mm fan mount for the Trianglelab Dragon Hotend (should fit the Phaetus as well) with support for rigid mounting

Ocena
0 / 5
Polubienia
5
Pobrania
80
Wydruki
2
Wyświetlenia
780
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Remixed  Dragon Hotend 40mm Fanduct by eponra to fit the Rigid mounting adapter for Trianglelabs Dragon hotend


The ring should go on the mount and the eyelet on the bottom aligns with the tightening screw of the fan duct. 
You will need to replace the screw with a longer one (12mm should work).

//Update: I was a bit concerned at first the proximity to the heatblock might deform and melt the PETG. I've since printed for about 20 hours (unenclosed) in total with a 5-6 hour print being the longest and can't say I see any deformation. 

Tagi