Bambu x1c AkroBin poop chute rack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This will hold an Akro-Mills AkroBin or similar that is aty least 5" long under the "poop chute" on your x1c.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 723
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
My x1c does not have a flat surface behind it to put a box for it to purge filament into. I had a bunch of these AkroBins (#30230, 10.875x5.5x5) laying around and they're a pretty perfect fit for the area behind the printer. This should work with other, similar bins, but they need to be at least 6" long to line up under the slot.
To install, remove at least 2 of the screws holding the enclosure on to the printer (ideally all 4), and replace them with m3x8 or longer screws when attaching the bracket.