Wall Mount for NIU (NQi) Charging Brick
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall mount for NIU (NQi Sport) electric scooter charging brick.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 90
- Wydruki
- 1
- Wyświetlenia
- 484
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Wall mount for NIU (NQi Sport) electric scooter charging brick. Features four holes for mounting to a wall and a convenient holder on the side for the charging cable plug.
I was annoyed I had the charging brick either laying on the ground or cluttering the shelf with all the cables, so I designed this wall mount which makes it easier to store and quickly grab the charging brick and charging plug.
No supports needed. Print as finely as you wish. I chose a layer height of 0,2 mm. PLA works fine, PETG of course might offer more longevity if you often remove the charging brick and drop it back in.
Depending on your walls, screw anchors might be highly recommended. Holes should fit M4 and M5 flat head screws.