1 / 3
AGT Vixen Airgun barrel washer support -airgun technology
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The AGT Vixen upgrade for enhanced barrel rigidity and consistent alignment
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 123
- Wydruki
- 0
- Wyświetlenia
- 1496
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
The AGN Vixen can experience loss of barrel alignment of a few centimeters when pressure is applied to the shrould either by holding the shroud or resting it against a support.
This washer fits snugly into the small space between the shroud and the block and stabilises it, similar to the FX barrel tension.
Edit: it appears that the holes are not for air but for a pin socket to remove the cap. This only makes installation easier as the holes do not need to line up 😀
Print in PETG, 20% infill and 0.2mm layer height.