Mont Blanc AMC 5412 foot unit clamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
clamp - part for Mont Blanc roof rack clamp, AMC 5412.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 521
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Public Domain
So my Mont Blanc roof rack has this 4 clamps that holds my roof rails ( hyundai tuscon). Feet for those clamps can easily get lots. I made a spare, because I lost one. I measured original and did best I could. It fits tight and holds great. I did more than a thousand km in below freezing temperatures with large box connected with it, without any problems. I suggest printing with PETG, its more elastic than PLA and also better for heat.
I dont know if it will fit your model ( each clamp is for specific car maker, but Im sure parts are similar). My clamping unit is AMC 5414, but I saw few other models and that part looked the same.
I think you should not print with it with fill 100%, it should have some squishiness to it. I did 30%.