Kreg Jig Clamp Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made this adapter to allow Pittsburgh 11" Locking Pliers (Harbor Freight) to work with a Kreg Jig.
- Ocena
- 5 / 5
- Polubienia
- 38
- Pobrania
- 118
- Wydruki
- 2
- Wyświetlenia
- 805
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
I made this adapter to allow Pittsburgh 11" Locking Pliers (Harbor Freight) to work with a Kreg Jig. The Pittsburgh Locking Pliers cost me just over $5 at HF as opposed to around $20 for the official Kreg Jig clamp.
Here's a link to the HF pliers that I used, though the link may stop working down the road: https://www.harborfreight.com/11-inch-swivel-pad-lock-grip-pliers-39535.html
Print Settings
Printer Brand:
Creality
Printer:
CR-10
Rafts:
No
Supports:
Yes
Resolution:
0.28
Infill:
40%
Filament: Hatchbox PLA Black
Notes:
I printed this with fairly high infill density (40%), though upping the infill didn't effect print time much. I used supports to get a clean slot for the pliers. The supports were really easy for me to remove.
To insert this into the Kreg Jig, I find it best to insert it sideways and turn the adapter to click the second notch into place.Category: Machine Tools