1 / 5
Backplate & Fan Blower for the LULZBOT 289 & 747 and Other 4 HEMERA XS REVO — zdjęcie 1
1 / 5

Backplate & Fan Blower for the LULZBOT 289 & 747 and Other 4 HEMERA XS REVO

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Backplate & Fan Blower for the HEMERA XS REVO TO WORK LULZBOT 289 & 747 and Other I wanted the Revo on the LULZBOT...

Ocena
0 / 5
Polubienia
2
Pobrania
24
Wydruki
0
Wyświetlenia
426
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Standard Digital File License

How to use Hemeara XS REVO on a sidekick 289 & 747 or any other Lulzbot 

This step is after wiring! This link has the PIN Assuagement Diagram 

https://ohai.lulzbot.com/project/he-toolhead/hot-end-tool-head-assembly/

PS: Stepper Motor wiring did give me problems. My fix was running the wiring on the Blue>Green>Red>Black on the stepper connector.

Instructions: select the H175 tool head on the settings on the printer under tool-heads next after installing the unit you'll need to adjust the Probe z offset until the toolhead gives you results you are looking for. For Example I had to adjust my probe z offset to -2.846 that got to the results that made me happy. Next step is to run a print and watch it go! Happy printing.

 

Tagi