1 / 1
F1 Logo Stand V2 remixed for Ikea Skadis
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted to put mine on display, so I remixed it.
- Ocena
- 5 / 5
- Polubienia
- 23
- Pobrania
- 75
- Wydruki
- 3
- Wyświetlenia
- 656
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 3) (Komentarze: 3)Remiksy (0)Kolekcje (34)Powiązane
Self-explanatory really. Should fit well. Quite rudimentary since it's my first time modeling a stl and I only used tinkercad lol.
Made the contact area and the peg a bit larger so it prints a bit easily. If you;re worried about it falling over during print, might want to use skirt / raft. Support not needed if your printer can print the small bridge between the peg and the stand itself.
Be careful not to break the peg when inserting it into the board. Might break away if not careful.
Printed @ 0.28mm layer height with low infill (7%)
