Watch wristband - 16/20mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple 20mm flexible wristband for 16mm watch lug width.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 97
- Wydruki
- 0
- Wyświetlenia
- 583
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
My modification of Michal Fanta's flexible watch strap to fit my sons watch. My model is a 133mm long version for a watch lug of 16mm with a pin diameter of 1.5mm. I've printed it using Fillamentum Flexfill 98A (TPU) to give it some flexibility. The model is built around a 4mm wide link witch is then replicated x number of times symmetrically (in my case 31x) and 2 end pieces to connect to the watch. If you want to modify the length of the band you have to manually move the right end piece (mirrored to the left) to match the length you want and then change the multiplier of the replication.
Included are model file for Autdesk Fusion 360 for the 133mm version.
I print it standing with small supports on the ends, but it can be printed with the flat side down without support. I also change the perimeters to 4 and infill to 0% for a ‘almost solid’ print. The print time is about the same for both ways.