Atomic Hawx 130 Skiboot replacement soles / sole pads
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement soles for the older Atomic Hawx skiboots. Should fit with all Hawx Large models from before 2018.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 56
- Wydruki
- 0
- Wyświetlenia
- 450
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter Sports
- Licencja
- Creative Commons — Attribution
I designed these replacement soles for my older Atomic Hawx 130 skiboots as it's difficult to find them to buy these days. They should fit with all Hawx models with sole-length “L” (250mm - 330mm) from before 2018. There are also soles for the newer Atomic Hawx Prime models which I have designed myself. You can find these here on Printables too.
Printing:
- Material: PETG or PLA+
- Layer-heights: 0,2mm
- Infill: 100% (can probably be lower as well)
- Supports: yes
Please note due to the slants of the soles you will need to print with supports and it is quite difficult to remove these. For structural robustness reasons I suggest to print these with the bottom of the soles on to the printer-bed and not sidewards. You will find models with and without the grid at the bottom to print to your preference. Would be interesting to hear if somebody has any success in printing the soles with a harder TPU.
These soles have been designed with FreeCAD.