Endbots Vector Metric Remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The now discontinued Endbots Vector Beetleweight robot kit remixed for 22mm brushless drive and metric fixtures
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 66
- Wydruki
- 0
- Wyświetlenia
- 742
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The still very competitive horizontal spinner Vector produced by Jeffrey Olijar of Endbots is unfortunately not currently available, though the Thingiverse file still exists for the printed parts.
The original ran on brushed 24mm gear motors. I have remixed and updated the printed parts to be used with 22mm brushless motors paired with 22mm planetary gearboxes (I use 27:1 reduction paired with DYS BE1806 2700kv at 3s). I have created more space in the rear tray for he extra brushless motor escs required and I have also remixed the hex nut holes to accept 5mm m3 hex standoffs.
I have also remixed the weapon pulley to accept drop in m5 square nuts, rather than the printed in place imperial versions of the original.
I have added
I printed the parts in Polymaker CF-nylon.
0.2mm height
0.4mm nozzle
3 perimeters
30% infill
In 6 fights so far, I have not had a print failure cause a loss
For assembly instructions watch Jeffreys excellent youtube video