1 / 3
4-assige kuilwagen DB Uaiks721 / NS Sds 90200 - Spoor 1 (1:32) — zdjęcie 1
1 / 3

4-assige kuilwagen DB Uaiks721 / NS Sds 90200 - Spoor 1 (1:32)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

4-assige kuilwagen DB Uaiks721 / NS Sds 90200 - Spoor 1 (1:32)

Ocena
0 / 5
Polubienia
35
Pobrania
382
Wydruki
1
Wyświetlenia
1450
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Vehicles
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

The Nederlandse Spoorwegen commissioned one 4 axle depressed well car in 1962, type Sds #90200. This one was very similar to the Uaiks721 deployed by the Deutsche Bundesbahn.

http://www.automatic-rock.nl/magazine-artikel/voor-elk-vervoer-een-wagen-kuilwagens/

http://www.familie-linberg.de/bahn/archiv/tiefladewagen/db/html/ba721.html

This is my interpretation of this very recognisable rolling stock in Gauge 1 (1:32 / 45 mm track)

It's absolutely required to split the frame to fit inside the bounderies of your printer.

The bogie-sides are screwed to the centre sections with M2 screws. Standard Märklin or LGB wheel sets rotate in MR63ZZ bearings. The bogies are fixed to the frame by 2 M5 screws. Use some M3 threaded rod to fit the buffers to the frame.

Use the printed item or some 1.5 mm metal wire as handrails on the shunting platform.

 

Good luck printing this big wagon for oversized and/or overweigth cargo. (length 626.5 mm!)