Shelly 1 to 3 sockets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easy way to automate Christmas lights
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 604
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU General Public License v2.0
Always at Christmas time. The tree, chain of lights and all kinds of accessories are set up and should of course be switched on and off automatically. So shelly plug into the socket and a 3-way distributor box on it. Complete. Looks ugly, so build a housing for the Selly1, connect the cable and you're done.
ATTENTION: Electricity is used here, there is a DANGER TO LIFE only suitable for trained persons.
For the replica I removed the lettering on the lid :-)
8 threaded heat inserts with 4mm thread and 8 screws M4x8-10mm are required. Of course a Schelly 1 and the corresponding cables and 3-way socket.
Technical Specs:
Nominal Wall Thickness: 2mm
Part Tolerance: 0.2mm
Bounding Box Size:99mm x 63mm x 25mm
Parts using Inserts:
Shelly 1
8x Threaded Inserts M4
8x M4x10 screws
File Clamp-Top you must print twice