Removable door for ARC enclosure (Bambu Lab P1P)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
With these hinges you will be able to easily remove the door by just lifting it up
- Ocena
- 4,5 / 5
- Polubienia
- 41
- Pobrania
- 185
- Wydruki
- 2
- Wyświetlenia
- 1553
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
I am often switching between PLA, PETG and ASA on my enclosed Bambu Lab P1P. For PETG or ASA the enclosure is great, but PLA gets too soft and jams the extruder at higher enclosure temperatures.
With this hinge design you can just take the door off and slide it back in when you need it again. I didn't just take off the lower bar, but also reinforced the remaining two parts, so there is no play and nothing will break.
Works really well so far.
Print with supports, just like the original model from thrutheframe.
I have added one hinge for each side depending on which direction your door opens.