1 / 2
Leather Working Detachable Card Slot Punch Tool Handle — zdjęcie 1
1 / 2

Leather Working Detachable Card Slot Punch Tool Handle

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Really simply Handle made to fit straight blades for leather working.

Ocena
0 / 5
Polubienia
44
Pobrania
89
Wydruki
0
Wyświetlenia
1164
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Really simply Handle made to fit straight blades for leather working. Modeled after the KemovanCraft version. Fits the blades that came with that kit perfectly, snug enough that the blade doesn't fall out.

If you require a different size please comment and I can make them available.

EDIT March 4 2023:
2 Versions available:

  1.  35mm width
  2.  70mm width (slightly taller handle)

Print Settings

Printer:

Ender 3 S1 Pro

Brim: 

Yes

Supports:

No

Resolution: 

.2

Infill:

30

Filament:

eSun PLA+ 
 

Notes:

 

I set a BRIM to hold it in place, not sure if require but probably recommended to avoid it falling over.

I printed it so that the blade holder is touching the plate and the handle points up. Feel free to experiment.

Average print time: 1h30min depending on machine.

Tagi