Overhang Test with 45° for Detailed prints
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A remix of the tomi3d's great detailed overhang model with an additional cross at 45°
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 133
- Wydruki
- 7
- Wyświetlenia
- 536
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution — Share Alike
This is a remix of tomi3d’s great detailed overhang model to test your printer’s part cooling fan performance. I added a cross at 45° to have more angles to view. The instructions to print this are the same as his model.
This model is designed for detailed prints, where the overhangs are small.
It tests for 40, 30, 20, and 10° overhangs.
This is a quick print, which takes about 40-50 mins.
Important: set the seam to an “inner” corner (aligned)!
When placing it on the print bed, please pay attention to the text on the bottom side. It will help you identify the x and y directions later.
Note: mine was printed on an AnkerMake M5.