Fan cover 60x25mm for Noctua silent mod Creality Ender 3 / Pro / Max
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made this cover for a Noctua 60x25mm fan that I installed on the power supply of my Ender 3 MAX
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 468
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
ENG:
I made this cover for a Noctua 60x25mm fan that I installed on the power supply of my Ender 3 MAX
You need 6 screws to install it. 2 you use to fix the fan to the PSU (from the inside). 4 to fix the cover to the fan
To power the fan, I plugged it into the same connector the original one was plugged into. This way the fan only spins when the power supply needs it to.
Printer: Creality Ender 3 MAX
Filament: OVERTURE PLA
Infill: 100%
Support: NO
Adhesion: As you wish
Nozzle: 0.4mm
Quality: CURA adaptive layers
ITA:
Ho creato questa cover per una mod che ho fatto all'alimentatore della mia Ender 3 MAX. Ho installato una ventola Noctua in quanto la mia ventola originale si è guastata e, inoltre, era molto rumorosa.
Vi serviranno 6 viti. 2 le userete per fissare la ventola dall'interno dell'alimentatore e 4 vi serviranno per avvitare la cover alla ventola.
Per l'alimentazione, ho collegato la ventola allo stesso connettore a cui era collegata quella orginale. In questo modo la ventola gira solo se l'alimentatore ne ha bisogno.
Stampante: Creality Ender 3 MAX
Filamento: OVERTURE PLA
Riempimento: 100%
Supporti: NO
Adesione: Come preferisci
Estrusore: 0,4mm
Qualità: CURA adaptive layers