Balloon Rocket Launcher (Rocket Included)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Balloon powered rocket launcher toy. You just need one balloon to take-off. No supports, no glue.
- Ocena
- 4 / 5
- Polubienia
- 111
- Pobrania
- 333
- Wydruki
- 2
- Wyświetlenia
- 2931
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Share Alike
Balloon powered rocket launcher toy. You just need one balloon to take-off. I printed it on MINI+ with 0,4mm nozzle and PLA.
Print info
Rocket can be printed with 15% gyroid infill, but upper part needs 100% infill. Recommend to use 3mm collar.
Launcher can be printed with 15% gyroid infill. Recommend to use 2mm collar.
Tail needs to be printed with 100% infill.
Material: PLA
Nozzle: 0,4mm
Layer: 0,2mm
Supports: NO
Print time: 2h 52m
Weight: 17g
Assembly
Stretch the balloon to the rocket launcher as far as the entire narrow part is on it. Then put the Rocket Tail into the Rocket and you can start launching.
Thank you for downloading and like.
