Silicone Ditto(Pokemon) Mold
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed a mold for the pokemon "Ditto", as Ditto should be made with soft material
- Ocena
- 5 / 5
- Polubienia
- 307
- Pobrania
- 813
- Wydruki
- 1
- Wyświetlenia
- 5056
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Characters & Monsters
- Licencja
- Creative Commons — Attribution — Share Alike
This is a 3d printed mold designed based on https://www.printables.com/model/382059-happy-ditto
Ditto should be very soft, so I made a 3d printed mold for Ditto and poured silicone into it.
I added a little bit of red coloring(for silicone use) to make it appear pink.
The mold needs nearly 200g of silicone to make a full-sized Ditto. I only poured around 160g, so there are still some space between the silicone and the mold.
Mold_a and mold_b mates precisely with three round pins and dimples designed into the mold. V-shaped edges between mold_a and mold_b is for filling clay to seal the gaps and also for demolding using wedge-shaped tool.
Some tips:
- Funnel for pouring silicone is recommended.
- Silicone release coating on inner surface of mold is recommended.
- Seal the gap between two molds and between funnel with clay.
- Degas your silicone before pouring!
- Be patient when pouring
- Always check leakage between each 3d printed parts during pouring.