Extra Spool Holder for Prusa Enclosure - Extended Length
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adds a second spool holder to the Prusa enclosure. Extended for easier loading. Filament can be fed from either spool.
- Ocena
- 5 / 5
- Polubienia
- 99
- Pobrania
- 464
- Wydruki
- 26
- Wyświetlenia
- 1707
- Oceny
- 26
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v3.0
This mod for the Orignal Prusa Enclosure adds a second spool holder under the normal one. The original idea was just a mirror of the stock holder, but this places the spool quite low which makes loading difficult. This design is extended to give just enough room so that the spool clears the bed when swapping spools. The great thing about this upgrade is that you can easily feed filament from either the top or bottom spool for easy color changes.
To install, follow the same instructions as for the original spool holder (steps 36 to 37) in the enclosure manual. You will need:
- 2x M3x12 screw
- 2x M3n nut
- 1x side arm