Tamtech 1/24th MG90S Servo Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
As I want to run my Tamtech 1/24th Ferrari Testarossa, I have removed all the stock electronics and am replacing them…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 239
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
As I want to run my Tamtech 1/24th Ferrari Testarossa, I have removed all the stock electronics and am replacing them with updated kit.
The servo I chose to replace the stock version from the '80's was a Turnigy MG90S - cheap, easily available and enough power to turn!
You will need to cut of part of a mounting tab to fit as a direct replacement, and I'm using one of the servo arms that came with the servo.
It's a bit off centre compared with the original due to the servo cable needing space, but it doesn't affect performance.
Print instructions
Unassociated tags: 1/24th
Category: R/C Vehicles Summary
As I want to run my Tamtech 1/24th Ferrari Testarossa, I have removed all the stock electronics and am replacing them with updated kit.
The servo I chose to replace the stock version from the '80's was a Turnigy MG90S - cheap, easily available and enough power to turn!
You will need to cut of part of a mounting tab to fit as a direct replacement, and I'm using one of the servo arms that came with the servo.
It's a bit off centre compared with the original due to the servo cable needing space, but it doesn't affect performance.
Print Settings
Printer: Anet A6
Rafts: No
Supports: No
Resolution: 0.2
Infill: 20%
Notes:
I am using Real Filament 8719128328881 Real PETG, (Spool of 1 kg, 1.75 mm, Opaque Black)
232° Hotend
70° Hotbed
How I Designed This
Designed with Fusion 360