Tamtech 1/24th 2S 450mAh LiPo Sled
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
As I want to run my Tamtech 1/24th Ferrari Testarossa, I have removed all the stock electronics and am replacing them…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 176
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
As I want to run my Tamtech 1/24th Ferrari Testarossa, I have removed all the stock electronics and am replacing them with updated kit.
This sled will fit the Turnigy Nano-Tech 450mAh 2S LiPo (and smaller) batteries - there's a bit of wiggle room as I also heat shrink some of my batteries for protection.
Easy to print and is a tight fit, so may require some filing on the edges to fit the aperture cleanly.
Print instructions
Unassociated tags: 1/24th
Category: Hobby Summary
As I want to run my Tamtech 1/24th Ferrari Testarossa, I have removed all the stock electronics and am replacing them with updated kit.
This sled will fit the Turnigy Nano-Tech 450mAh 2S LiPo (and smaller) batteries - there's a bit of wiggle room as I also heat shrink some of my batteries for protection.
Easy to print and is a tight fit, so may require some filing on the edges to fit the aperture cleanly.
Print Settings
Printer: Anet A6
Rafts: No
Supports: No
Resolution: 0.2
Infill: 20%
Notes:
I am using Real Filament 8719128328881 Real PETG, (Spool of 1 kg, 1.75 mm, Opaque Black)
232° Hotend
70° Hotbed
How I Designed This
Designed with Fusion 360