Pegwin Keychain (Spinning Feet) - Fall Guys
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The Pegwin from Fall Guys
- Ocena
- 4 / 5
- Polubienia
- 42
- Pobrania
- 273
- Wydruki
- 2
- Wyświetlenia
- 1859
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
This is the little “Pegwin” from the Fall Guys game, which you can have as a keychain.
The fett spin round like they do in the Fall Guys game.
You will need to glue much of it together, and the body parts will need support, but i have apready orientated the STl files to the position I used to print my own one, and where i feel it will give the best results.
For the best results when printing the eye, I printed the black part, left it on the print bed, changed to white filament, then just printed the white part strait over the top. and they should nice and cleanly combine to make a good quality eye.
Use a short piece of filament as the axel for the feet.