Articulating camera mount for revo connect mini bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This allows connecting an articulating camera arm to a Prusa Mini with the E3D revo connect bracket for the Mini.
- Ocena
- 5 / 5
- Polubienia
- 0
- Pobrania
- 17
- Wydruki
- 1
- Wyświetlenia
- 161
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I used the articulating camera arm (https://www.printables.com/model/3407-articulating-raspberry-pi-camera-mount-for-prusa-m) with a bracket in the extrusion - which didn't work as well as I wanted. After upgrading to the revo hotend, and adding the nozzle holder for the mini (https://www.printables.com/model/159519-prusa-mini-bracket-revo-connect) I thought the forward facing mount point should be suitable for hooking up the camera.
The connector is rather wobbly - it's not really designed as a camera mount after all - so I've created a version with additional supports and a rather tight fit. I recommend using that version.
Generally this should work on any of the ‘revo connect’ holders, though the proper tight support might only work on the Mini holder.
This model uses the OpenSCAD articulating connector from the lifecam mount: https://www.printables.com/model/209564-microsoft-lifecam-mount