1 / 10
17th century Tulip vase A Dutch design — zdjęcie 1
1 / 10

17th century Tulip vase A Dutch design

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Orientacyjna cena wydruku pliku

8,24 € – 10,08 € netto (bez VAT)

Dla pliku: TulipVaseTop_0.6n_0.35S_10Fill_PLA_6h13m.gcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 9,16 € netto (środek widełek).

Masa podana przez autora
176 g
Czas druku podany przez autora
6,22 godz.
Materiał u źródła
PLA
Materiał wyceny
PLA
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

Tulip vase based on the 17th century Delft Blue tulip vase. A vase especially for tulips.

Ocena
0 / 5
Polubienia
21
Pobrania
118
Wydruki
0
Wyświetlenia
1213
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Home Decor
Licencja
Creative Commons — Attribution — Noncommercial

We Dutch are known for our tulip flowers. But what not many people know is that special vases were designed for tulips as early as the 17th century. You can read more about the tulip vase on Wikipedia.

I designed this tulip vase to be printed on the Prusa Mini.
To be able to print a higher vase, I made the vase in 2 parts that fit together. Many original tulip vases are also built in several parts and are therefore often called pyramid vases.
No water is needed in the upper part, so that was also possible. The parts do not need to be glued together either. As a result, the inside is also easy to clean after the tulips have finished blooming.

I printed the parts with a 0.6 mm nozzle so keep that in mind when printing with the gcode files.
I have added support to ensure that the vase has enough support to be printed, but that will not be necessary on all printers.

Nozzle 0.6
Filament PLA
Layer thickness 0.35

 

Support me with a cup of coffee.

 

Tagi