Upgrade for Eibos Cyclopes from radial to Axial rolemount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a upgrade for the Eibos Cyclopes filament dryer to mount filament rols axial insted of radial.
- Ocena
- 3 / 5
- Polubienia
- 14
- Pobrania
- 72
- Wydruki
- 2
- Wyświetlenia
- 751
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is specaly for soft roles like from sun.
If you want the short version to replace only one side you need:
- 2x Leg
- 2x holder short
If you want to replace the whole place you need:
- 2x Leg
- 2x holder long
- 1x Axis
For the short version you can reuse one of the axis from the Eibos.
For the long version just reuse the bearing from the Eibos axis.
Be aware that every side has a small nose to snap in so it can't open it by it self.
This is a tight fit so you may need a bit of force to place the holder.
Here are my print settings:
- walls: 4
- upper walls: 4
- lower walls: 4
- Filling: 30% and Gyroid
- Print every part separately and laying flat on the print surface for the nessecary stability!
Maybe you have to sand the axis a bit to get smooth.