Stop Block for Mitre Saw without Fence
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stop block for t-track flush mounted into a mitre station worktop.
- Ocena
- 3 / 5
- Polubienia
- 31
- Pobrania
- 99
- Wydruki
- 1
- Wyświetlenia
- 1132
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- GNU General Public License v2.0
This stop block fits standard t-track with a 3/8 inch or 9mm gap, fitted flush to the workbench, rather than to a fence.
For mitre saw stations where the fence is installed flush to the workbench rather than to a fence.
The hole is designed for an M6 bolt and knob. The 6mm hole is tight, so will need drilling out slightly to accommodate the bolt which should be slightly loose to allow free movement when the knob is loosened.
Also requires an M6 knob. Can be purchased or printed, e.g. https://www.printables.com/model/182968-m6-nut-knob-printed-with-encapsulated-nut
UPDATE: v2 includes;
- increased diameter of bolt hole to 7mm - removing need to drill out for M6 t-track bolt
- increased space between t-track guides - allowing t-track bolt to tighten flush with the track
- increased width of the main stop block to reduce deflection