The LOOP insert
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The insert by mebeco is great, it was just slightly too big for my ender 3 printer. I split stuff up
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 99
- Wydruki
- 1
- Wyświetlenia
- 1314
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution
The insert by mebeco is great, it was just slightly too big for my ender 3 printer. I split stuff up and also split up the card holders to make them more useful in play. I adjusted a couple of things to be thicker and split up to print on smaller printers.
1A and 1B can be attached together, print one of each
2 - I did not make any adjustments to this piece from the original by mebeco, print one
3A and 3B were just split, print one of each
4A - I split these up for the cards, print 3 of these
4B - holds additional cards and has an extra piece as a spacer for the box, print one of these (you can print a second one as a spacer if you like to hold things in place in the box)
Category: Games