Glowing night sky and planets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is ment to be printed with glow in the dark filament.
- Ocena
- 4,875 / 5
- Polubienia
- 65
- Pobrania
- 568
- Wydruki
- 10
- Wyświetlenia
- 2722
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is ment to be printed with glow in the dark filament. It can proivde more realistic look of a night sky and planets.
Print instructions
Use hardened steel nozzle for glowing filament.
Planets:
Scale it/cut it in your slicer to fit your needs.
I found out that planet thickness around 2-3mm (roghly 1/8 inch) seems to be a good compromise. Thinner shines less. Thicker looses shades and details
Aim for 3D effect (deeper valleys) rather than bulky body.
Dont worry to cut/scale the body in Z axis. Small holes or empty space in your planets are not a problem (as long as it holds together)... It gives you more visible shades.
Stars:
If you are willing to give a huge amount of effort, you can achieve "Milky way" effect by printing a lot of smaller stars.
note: I can not recommend to print smaller stars than 7mm (1/4 Inch). It is barely visible and may have potential problem with adhesion to your bed
I used 100% infill