Cat treat fumble roll toy

I designed, what we jokingly call “fumble roll” for our cats. Fill the roll with some dry food or treats and let the cat figure out how to get them. 

I included different dampers, please try how your cat handles the roll. If they get the treats to easily use dampers v2 or v3. I recommend one cap with v1 and other one with v3.

The dampers must be printed in TPU, otherwise you can't put them on and tpu makes this a lot quieter if you have hard floors. 

If you have a MMU you can also print the threaded cap with my cat logo, which let's you easily identify which side you can open.

Printing Instructions:

• print with 0.2mm layer height
• only the caps need support
• print the dampers in TPU
• print the rest in PLA or PETG

Parts to print:

• 1x body
• 1x cap_threaded
• 1x cap_no_thread
• 2x dampers 

optionally:

• 1x cap_threaded_logo

Assembly:

1. Put the dampers on the caps.
2. Glue the cap without thread into the body with 2K glue/superglue (or similiar) 
3. Screw the threaded cap into the body