Magnetic Coupling for 50mm Hose
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted to be able to quickly remove the hose from the router, so I created a screw on coupler held with magnets.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 74
- Wydruki
- 0
- Wyświetlenia
- 501
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- GNU General Public License v3.0
I needed a coupler for my LowRider3 since I also use the hose as a vaccum for the table. Not wanting to always remove the zip-ties that attach the hose to the router, I created this coupler.
It can be used to connect a 50mm hose (maybe 2'' works as well) to another one with magnets. I also wanted to be able to screw the hose onto it because the metal cable clamps are not really feasible if you don't want to get cut every time you use the hose.
You need 12 5x4mm magnets for it to work and they hold the hose together well, I've not had it disconnect during a job yet.
Print settings are the same as for every part of the LowRider3 with 30% infill. One might get away with less, I didn't try it though.