NACA-2412 wing with working flap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wing that can be done with two different technics, a fully printed wing, or printing molds to do it out of carbon fiber.
- Ocena
- 0 / 5
- Polubienia
- 38
- Pobrania
- 378
- Wydruki
- 0
- Wyświetlenia
- 3186
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
This wing is fully functional, it was made out with the NACA-2412 airfoil, the same used in the cessna 172, the flap, extends and retracts as in the real life passenger airplanes. It can be done fully 3d printed, but the weight would be to high to mount the wing into an rc airplane, the other technic, is to print the molds and with carbon fiber or fiber glass make the external parts than can be joined later with the ribs.
there is a .txt file with the instructions to do the two versions