Parametric Open SCAD Timingbelts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Generates a small subset of timing belt profiles so you can cut them out of your models.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 127
- Wydruki
- 0
- Wyświetlenia
- 551
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Share Alike
This is one of my thingiverse files, finally imported it across to printables.
Generates a small subset of timing belt profiles so you can cut them out of your models. This is heavily Derived from http://www.thingiverse.com/thing:16627 by Droftarts in so much that I stole the profiles from that file.
Currently generates T2.5, T5, T10 and MXL
Instructions
Include in your SCAD file using the use command.
call
belt_length(profile = "T5", belt_width = 10, n = 15);
profile is a string as specified in the file
belt_width is the width of the timing belt
n is the number of teeth
Category: Parts